| Application | Sizing of panel material in single sheets and stacks |
|---|---|
| Machines | Beam saw |
| Type | D |
| Material | Core : Particleboard, MDF, HDF Lamination : Melamine, HPL, paper, foil |
| EdgeMaterial | HW |
Features & Benefits
•Saw blade runs quieter due to vibration damping slits in the plate
•Extreme flat plate and tight manufacturing tolerances enable a truer run out for a better cut quality
Kanefusa original developed polymer injected laser slits dampen vibration of the saw body. Therefore our saw blades run quieter and micro abrasion of the carbide due to vibration is suppressed.
Size
| Size | Type | Pin holes | ||||
|---|---|---|---|---|---|---|
| D | B | b | d | z | ||
| 220 | 3.2 | 2.2 | 30 | 64 | D | 2/7/42+2/10/60 |
| 230 | 3.2 | 2.2 | 30 | 64 | D | 2/7/42+2/9/46.5+2/10/60 |
| 240 | 3.2 | 2.2 | 30 | 54 | D | 2/6/42 |
| 250 | 3.2 | 2.2 | 30 | 60 | D | 2/7.5/42 |
| 250 | 3.2 | 2.2 | 30 | 80 | D | 2/7/42+2/9/46.5+2/10/60 |
| 280 | 3.2 | 2.2 | 30 | 60 | D | 2/7/42+2/9/46.5+2/10/60 |
| 300 | 3.2 | 2.2 | 30 | 72 | D | 2/7/42+2/9/46.5+2/10/60 |
| 300 | 3.2 | 2.2 | 30 | 96 | D | 2/7/42+2/9/46.5+2/10/60 |
| 303 | 3.2 | 2.2 | 30 | 100 | D | 2/7/42+2/9/46.5+2/10/60 |
| 305 | 4.4 | 3.0 | 30 | 60 | D | 2/10/60 |
| 350 | 3.2 | 2.2 | 30 | 80 | D | 2/10/60 |
| 350 | 3.2 | 2.2 | 30 | 108 | D | 2/9/44+2/10/60 |
| 350 | 4.4 | 3.2 | 75 | 72 | D | 2/10/120 |
| 400 | 3.5 | 2.4 | 30 | 120 | D | 2/7/42+2/10/60 |
| 400 | 4.25 | 3.2 | 30 | 72 | D | 2/10/60 |
| 460 | 4.6 | 3.2 | 30 | 72 | D | 2/13/94 |
| 470 | 4.4 | 3.2 | 75 | 96 | D | 4/15/105 |
| 480 | 4.4 | 3.2 | 30 | 80 | D | |
| 480 | 4.8 | 3.5 | 80 | 72 | D | 4/19/120+2/9/130 |
| 500 | 4.4 | 3.0 | 75 | 60 | D | |
| 500 | 4.4 | 3.2 | 80 | 60 | D | |
| 500 | 4.4 | 3.2 | 80 | 72 | D | |
| 500 | 4.4 | 3.2 | 80 | 72 | D | 4/8.5/100+2/14/110+2/7/110 |
| 500 | 4.7 | 3.4 | 30 | 60 | D | |
| 500 | 4.8 | 3.5 | 60 | 60 | D | 2/11/115 |
| 500 | 4.8 | 3.5 | 60 | 72 | D | |
| 520 | 4.8 | 3.5 | 60 | 60 | D | |
| 530 | 5.0 | 3.5 | 30 | 60 | D | |
| 530 | 5.8 | 4.0 | 60 | 60 | D | 1/11/85 |
| 550 | 5.0 | 3.5 | 40 | 72 | D | |
| 550 | 5.0 | 3.5 | 80 | 72 | D | |
| 550 | 5.0 | 3.5 | 100 | 72 | D | |
| 570 | 4.8 | 3.5 | 60 | 60 | D | |
| 570 | 5.8 | 4.0 | 60 | 96 | D | |
| 580 | 5.5 | 4.0 | 40 | 60 | D | |
| 600 | 5.8 | 4.0 | 60 | 72 | D | 2/19/120+2/11/115 |
| 600 | 6.2 | 4.0 | 80 | 72 | D | |
| 620 | 6.2 | 4.0 | 40 | 72 | D | |
| 650 | 6.2 | 4.0 | 40 | 72 | D | |
| 670 | 6.2 | 4.2 | 40 | 72 | D | |
| 680 | 6.2 | 4.0 | 40 | 60 | D | |
| 700 | 6.2 | 4.4 | 80 | 60 | D | 2/17/110 |
